Features

• Up to 8 FXS and/or 4 FXO ports—Business-class, compact, reliable stand-alone VoIP gateway with different port options. Supports simultaneous voice or fax calls on all ports.
• Advanced Local Call Switching—Virtual interfaces and routing tables provide industry leading flexibility in call handling programming. Local call switching, soft fallback to alternative routes. Simultaneously connects to multiple SIP servers, IP PBXs, etc.
• Complete SIP and T.38 support—Supports the complete range of industry standard VoIP: SIP, H.323, T.38 fax, fax and modem handling, DTMF relay. Codecs G.729, G.723, etc.
• Easy Management & Provisioning—Web-based management, SNMP, command line interface. automated mass provisioning for efficient large-scale deployments.
• Outstanding Interoperability—Proven integration for voice and T.38 fax with  VoIP SIP Communications Server, 3CX®, and many other leading IP PBX systems, SIP software applications, and VoIP soft switch vendors.

SmartNode SN4110 Series Model Specific Features

• SN4112/JO/EUI - 2 FXO
• SN4114/JO/EUI - 4 FXO
• SN4114/JS/EUI - 2 FXS
• SN4114/JS/EUI - 4 FXS
• SN4118/JO/EUI - 8 FXS
• SN4114/2JS2JO/EUI - 2 FXS + 2 FXO
• SN4116/4JS2JO/EUI - 4 FXS + 2 FXO
• SN4118/4JS4JO/EUI - 2 FXS + 4 FXO

Why Patton?

The business-class SmartNode 4110 VoIP Media Gateway supports up to eight transparent phone calls and leverages VoIP for carrier and corporate access.

The SN4110 series is the perfect choice for analog-to-IP connectivity supporting up to 4 FXO ports, 8 FXS ports, or a combination FXO and FXS ports. With its FXS analog ports the SN4110 connects to any legacy telephone or PBX and provides dial-tone, ringing, caller-ID and other services. When equipped with FXO ports, the local PSTN can be accessed enabling local calling and other applications. Flexible call integration allows per-port telephone numbers, programmable call progress tones, and distinctive ringing. With Telephony-over-IP (ToIP) call switching, calls can automatically be routed to the PSTN or the IP network while providing flexible numbering plans and end-to-end feature transparency. PPPoE, DHCP, and VLAN offers universal IP connectivity and optional IPSEC VPN with AES/3DES guarantees secure voice over the public network. 

Patton's SmartNode 4110 delivers the legacy phone interfaces, service transparency, and flexible PSTN integration for true converged packet voice.

SmartNode 4110 Series Features & Benefits

• 10/100 Full-Duplex Auto-Sensing Auto-MDX Ethernet port
• 14 LEDs for System, Ethernet, and Call status
• Universal 100-240VAC (contact us for 48VDC Power)
• Configuration and Management through Webinterface, CLI, Telnet, Console and SNMP
• Up to 8 Voice and FAX Calls over IP Support-Use any CODEC or T.38 FAX on any port, any time
• 0,2,4,6 or 8 FXS ports connect to your standard telephone with programmable tones, ringing, CLIP etc (depending on model)
• 0, 2 or 4 FXO ports connect to a PBX or the PSTN (depending on model)
• Programmable call routing switches between any FXS, FXO, H.323 and SIP interface.
• Toll Quality CODECs & T.38 FAX-Use standard G.711 or G.726 Codecs for toll-quality or G.723.1 or G.729ab for low-bandwidth applications. T.38 FAX and FAX Bypass features allow high-quality fax over IP.
• H.323v4 and SIP Signaling are both supported at the same time in one firmware. Maximum interoperability and deployable into any enterprise or carrier softswitch network, or standalone.
• IPSEC VPN, Encryption, & VLAN-Connect your telephone to IP and secure your calls with optional IPSEC. Choose DES/3DES or AES for encryption. VLAN tagging/stripping allows interfacing into your 802.1pQ network.
• Full ToIP™ Call Switching-Enhanced circuit-switched call routing allows user programmable and adaptive call handling based on hunt groups, caller/called ID and other call parameters

SmartNode 4110 Series Specifications

• Voice Connectivity
  
  • 0, 2, 4, 6, or 8 FXS ports
    
    • 2-wire Loopstart, RJ-11/12
    • Short haul loop 1.1 KM @3REN
    • EuroPOTS (ETSI EG201 188)
    • Programmable AC impedence, feeding, ring, and on-hook voltage
    • Caller-ID Type-1/2 FSK and ITU V.23/Bell 202 generation
  • 0, 2 or 4 FXO ports
    
    • 2-wire loop-start presented as an RJ-11/12
    • Programmable impeadance, ring detection, tone detection, disconnect supervision
    • 2.5kV line isolation Surge Protection: Voice Ports: Tip & Ring protected by 270 V side actor
    • Off-hook and ring detection, Automatic line gain, Programmable ring count
    • End of Call detection, Line drop, busy tone, battery reversal detection
    • Hook-Flash Sending, Hook-Flash relay, DTMF send, detect, and relay
    • Caller ID FSK CLI reception and relay (Bellcore/ANSI and ETSI/ITU), Call routing based on Caller ID
    • Second dial-tone for two-stage DTMF dialing, Call routing based on DTMF numbers
• Data Connectivity
  • 10/100 Full Duplex, Autosensing, Ethernet RJ-45 port
• Voice Processing (signalling dependent)
  
  • Voice codes
  • G.711 A-Law/µ-Law (64kbps)
  • G.726 (ADPCM 40, 32, 24, 16 kpbs)
  • G.723.1 (5.3 or 6.3 kbps)
  • G.729ab (8kbps)
  • Up to 8 parallel voice connections
  • G.168 echo cancellation
  • Carrier tone detection and generation
  • Silence suppression and comfort noise
  • Configurable dejitter buffer
  • Configurable tones (dial, ringing, busy)
  • RTP/RTCP (RFC 1889)
• Fax and Modem Support
  
  • G.711 Fax- and Modem-Bypass
  • T.38 Fax relay (9.6 k, 14.4 k)
• Voice Signalling
  
  • H.323v4
  • RAS, H.225, H.245
  • H.235 secure RAS
  • Fast-connect, early H.245
  • Gatekeeper autodiscovery, Alias registration
  • Overlap dialing
  • Empty capability set (call transfer, hold)
  • H.323v1 call transfer, hold
  • SIPv2
  • Supported RFCs: 2806, 2833, 2976, 3261, 3263, 3264, 3323, 3325, 3515
  • draft-ietf-sip-cc-transfer-02, draft-ietf-sip-cc-transfer-05
  • draft-ietf-sip-refer-02, draft-ietf-sip-replaces-01
  • draft-ietf-sip-session-timer-04, draft-ietf-sip-session-timer-08
  • Caller ID, CLIR (receive from PSTN)
  • Support for proxy and redirect servers
  • RFC2833: DTMF Relay, SIP INFO DTMF Relay, Fax-Bypass (G.711), T.38 Fax-Relay
  • Session Timer, Record-Routing, Authentication
  • Compression CODECs, Fax/Modem bypass
• Call Routing
  
  • Virtual Interfaces
  • Routing Criteria: Called party number (Destination) Calling party number (Source) Time of day, day of week, date
  • Longest prefix match, wildcard match, regular expression match
  • Number Manipulation Functions: Replace numbers Add/remove digits Regular Expressions
  • Fallback Routing: Soft Fallback to alternative interface or Call Router table
• IP Services
  
  • IPv4 router
  • Static Routes, ICMP redirect (RFC 792), RIPv1, v2 (RFC 1058 and 2453)
  • DiffServe/ToS Packet labeling
  • 802.1p VLAN tagging
  • Access Control Lists
  • IPSEC AH & ESP Modes, preshared keys
  • AES/DES/3DES Encryption (optional)
• Management
  
  • Web/HTTP GUI
  • Industry standard CLI with local console (CRJ-45, RS-232) and remote Telnet access
  • TFTP configuration & firmware loading
  • SNMP MIB II and product MIB
  • Secure mass provisioning for both firmware and configuration
  • Built-in diagnostic tools (trace, debug, call generator)
• Operating Environment
  
  • Operating temperature:  32-122°F (0-50°C)
  • Operating humidity: 5-80% (non condensing)
• System
  
  • CPU Motorola MPC870 @ 66 MHz
  • Memory 32MB SDRAM/8MB Flash
  • Power: External universal 100 - 240 VAC (50/60 Hz) power supply
  • Power dissipation: 4 - 12W (model dependent)
• Compliance
  
  • EMC compliance: EN55022 and EN55024
  • Safety compliance: EN 60950
  • CE per RTTE 99/5/EC (EMC and LVD)
  • FCC Part 15 Class A
  • TBR-21 (FXS)
  • RoHS